Environmental and Health Impacts of Graphene and Other Two-Dimensional Materials: A Graphene Flagship Perspective.

Two-dimensional (2D) materials have attracted tremendous interest ever since the isolation of atomically thin sheets of graphene in 2004 due to the specific and versatile properties of these materials. However, the increasing production and use of 2D materials necessitate a thorough evaluation of the potential impact on human health and the environment. Furthermore, harmonized test protocols are needed with which to assess the safety of 2D materials. The Graphene Flagship project (2013-2023), funded by the European Commission, addressed the identification of the possible hazard of graphene-based materials as well as emerging 2D materials including transition metal dichalcogenides, hexagonal boron nitride, and others. Additionally, so-called green chemistry approaches were explored to achieve the goal of a safe and sustainable production and use of this fascinating family of nanomaterials. The present review provides a compact survey of the findings and the lessons learned in the Graphene Flagship.

A comparative investigation of the chemical reduction of graphene oxide for electrical engineering applications.

The presence of oxygen-containing functional groups on the basal plane and at the edges endows graphene oxide (GO) with an insulating nature, which makes it rather unsuitable for electronic applications. Fortunately, the reduction process makes it possible to restore the sp2 conjugation. Among various protocols, chemical reduction is appealing because of its compatibility with large-scale production. Nevertheless, despite the vast number of reported chemical protocols, their comparative assessment has not yet been the subject of an in-depth investigation, rendering the establishment of a structure-performance relationship impossible. We report a systematic study on the chemical reduction of GO by exploring different reducing agents (hydrazine hydrate, sodium borohydride, ascorbic acid (AA), and sodium dithionite) and reaction times (2 or 12 hours) in order to boost the performance of chemically reduced GO (CrGO) in electronics and in electrochemical applications. In this work, we provide evidence that the optimal reduction conditions should vary depending on the chosen application, whether it is for electrical or electrochemical purposes. CrGO exhibiting a good electrical conductivity (>1800 S m-1) can be obtained by using AA (12 hours of reaction), Na2S2O4 and N2H4 (independent of the reaction time). Conversely, CrGO displaying a superior electrochemical performance (specific capacitance of 211 F g-1, and capacitance retention >99.5% after 2000 cycles) can be obtained by using NaBH4 (12 hours of reaction). Finally, the compatibility of the different CrGOs with wearable and flexible electronics is also demonstrated using skin irritation tests. The strategy described represents a significant advancement towards the development of environmentally friendly CrGOs with ad hoc properties for advanced applications in electronics and energy storage.

Impact of physico-chemical properties on the toxicological potential of reduced graphene oxide in human bronchial epithelial cells.

The increasing use of graphene-based materials (GBM) requires their safety evaluation, especially in occupational settings. The same physico-chemical (PC) properties that confer GBM extraordinary functionalities may affect the potential toxic response. Most toxicity assessments mainly focus on graphene oxide and rarely investigate GBMs varying only by one property. As a novelty, the present study assessed the in vitro cytotoxicity and genotoxicity of six reduced graphene oxides (rGOs) with different PC properties in the human bronchial epithelial 16HBE14o - cell line. Of the six materials, rGO1-rGO4 only differed in the carbon-to-oxygen (C/O) content, whereas rGO5 and rGO6 were characterized by different lateral size and number of layers, respectively, but similar C/O content compared with rGO1. The materials were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, laser diffraction and dynamic light scattering, and Brunauer-Emmett-Teller analysis. Cytotoxicity (Luminescent Cell Viability and WST-8 assays), the induction of reactive oxygen species (ROS; 2',7'-dichlorofluorescin diacetate-based assay), the production of cytokines (enzyme-linked immunosorbent assays) and genotoxicity (comet and micronucleus assays) were evaluated. Furthermore, the internalization of the materials in the cells was confirmed by laser confocal microscopy. No relationships were found between the C/O ratio or the lateral size and any of the rGO-induced biological effects. However, rGO of higher oxygen content showed higher cytotoxic and early ROS-inducing potential, whereas genotoxic effects were observed with the rGO of the lowest density of oxygen groups. On the other hand, a higher number of layers seems to be associated with a decreased potential for inducing cytotoxicity and ROS production.

Role of Chemical Reduction and Formulation of Graphene Oxide on Its Cytotoxicity towards Human Epithelial Bronchial Cells.

Graphene-based materials may pose a potential risk for human health due to occupational exposure, mainly by inhalation. This study was carried out on bronchial epithelial 16HBE14o- cells to evaluate the role of chemical reduction and formulation of graphene oxide (GO) on its cytotoxic potential. To this end, the effects of GO were compared to its chemically reduced form (rGO) and its stable water dispersion (wdGO), by means of cell viability reduction, reactive oxygen species (ROS) generation, pro-inflammatory mediators release and genotoxicity. These materials induced a concentration-dependent cell viability reduction with the following potency rank: rGO > GO >> wdGO. After 24 h exposure, rGO reduced cell viability with an EC50 of 4.8 µg/mL (eight-fold lower than that of GO) and was the most potent material in inducing ROS generation, in contrast to wdGO. Cytokines release and genotoxicity (DNA damage and micronucleus induction) appeared low for all the materials, with wdGO showing the lowest effect, especially for the former. These results suggest a key role for GO reduction in increasing GO cytotoxic potential, probably due to material structure alterations resulting from the reduction process. In contrast, GO formulated in a stable dispersion seems to be the lowest cytotoxic material, presumably due to its lower cellular internalization and damaging capacity.

In vitro assessment of skin irritation and corrosion properties of graphene-related materials on a 3D epidermis.

The increasing use of graphene-related materials (GRMs) in many technological applications, ranging from electronics to biomedicine, needs a careful evaluation of their impact on human health. Skin contact can be considered one of the most relevant exposure routes to GRMs. Hence, this study is focused on two main adverse outcomes at the skin level, irritation and corrosion, assessed following two specific Test Guidelines (TGs) defined by the Organization for Economic Co-operation and Development (OECD) (439 and 431, respectively) that use an in vitro 3D reconstructed human epidermis (RhE) model. After the evaluation of their suitability to test a large panel of powdered GRMs, it was found that the latter were not irritants or corrosive. Only GRMs prepared with irritant surfactants, not sufficiently removed, reduced RhE viability at levels lower than those predicting skin irritation (≤50%, after 42 min exposure followed by 42 h recovery), but not at levels lower than those predicting corrosion (<50%, after 3 min exposure or <15% after 1 h exposure). As an additional readout, a hierarchical clustering analysis on a panel of inflammatory mediators (interleukins: IL-1α, IL-1ß, IL-6, and IL-18; tumor necrosis factor-α and prostaglandin E2) released by RhE exposed to these materials supported the lack of irritant and pro-inflammatory properties. Overall, these results demonstrate that both TGs are useful in assessing GRMs for their irritant or corrosion potential, and that the tested materials did not cause these adverse effects at the skin level. Only GRMs prepared using toxic surfactants, not adequately removed, turned out to be skin irritants.

Structure and toxicity of AZA-59, an azaspiracid shellfish poisoning toxin produced by Azadinium poporum (Dinophyceae).

To date, the putative shellfish toxin azaspiracid 59 (AZA-59) produced by Azadinium poporum (Dinophyceae) has been the only AZA found in isolates from the Pacific Northwest coast of the USA (Northeast Pacific Ocean). Anecdotal reports of sporadic diarrhetic shellfish poisoning-like illness, with the absence of DSP toxin or Vibrio contamination, led to efforts to look for other potential toxins, such as AZAs, in water and shellfish from the region. A. poporum was found in Puget Sound and the outer coast of Washington State, USA, and a novel AZA (putative AZA-59) was detected in low quantities in SPATT resins and shellfish. Here, an A. poporum strain from Puget Sound was mass-cultured and AZA-59 was subsequently purified and structurally characterized. In vitro cytotoxicity of AZA-59 towards Jurkat T lymphocytes and acute intraperitoneal toxicity in mice in comparison to AZA-1 allowed the derivation of a provisional toxicity equivalency factor of 0.8 for AZA-59. Quantification of AZA-59 using ELISA and LC-MS/MS yielded reasonable quantitative results when AZA-1 was used as an external reference standard. This study assesses the toxic potency of AZA-59 and will inform guidelines for its potential monitoring in case of increasing toxin levels in edible shellfish.

Assessment of skin sensitization properties of few-layer graphene and graphene oxide through the Local Lymph Node Assay (OECD TG 442B).

Skin contact is one of the most common exposure routes to graphene-based materials (GBMs) during their small-scale and industrial production or their use in technological applications. Nevertheless, toxic effects in humans by cutaneous exposure to GBMs remain largely unexplored, despite skin contact to other related materials has been associated with adverse effects. Hence, this in vivo study was carried out to evaluate the cutaneous effects of two GBMs, focusing on skin sensitization as a possible adverse outcome. Skin sensitization by few-layer graphene (FLG) and graphene oxide (GO) was evaluated following the Organization for Economic Cooperation and Development (OECD) guideline 442B (Local Lymph Node Assay; LLNA) measuring the proliferation of auricular lymph node cells during the induction phase of skin sensitization. Groups of four female CBA/JN mice (8-12 weeks) were daily exposed to FLG or GO through the dorsal skin of each ear (0.4-40 mg/mL, equal to 0.01-1.00 mg/ear) for 3 consecutive days, and proliferation of auricular lymph node cells was evaluated 3 days after the last treatment. During this period, no clinical signs of toxicity and no alterations in body weight and food or water consumptions were observed. In addition, no ear erythema or edema were recorded as signs of irritation or inflammation. Bromo-deoxyuridine (BrdU) incorporation in proliferating lymphocytes from ear lymph nodes (stimulation indexes <1.6) and the histological analysis of ear tissues excluded sensitizing or irritant properties of these materials, while myeloperoxidase activity in ear biopsies confirmed no inflammatory cells infiltrate. On the whole, this study indicates the absence of sensitization and irritant potential of FLG and GO.

Cell immunolocalization of ciguatoxin-like compounds in the benthic dinoflagellate Gambierdiscus australes M. Chinain & M.A. Faust by confocal microscopy.

Dinoflagellates of the genera Gambierdiscus and Fukuyoa are able to produce potent neurotoxins like ciguatoxins (CTXs), which, after biooxidation in fish, are responsible for ciguatera intoxication. An isolate of G. australes from the Canary Islands, that revealed the presence of CTX-like compounds by immunosensing tools, was studied by immunocytochemistry to localize intracellular CTX-like compounds, using 8H4 monoclonal antibody that specifically recognizes the right wing of CTX1B and CTX3C analogues. Confocal microscopy observations of immunostained whole cells revealed a strong positive reaction on cell surface and all along the cell outline, while no reaction was detected inside the cells, probably because the antibody was not able to pass through thecal plates. Cell sections showed a positive antibody staining not only on thecal plates, but also inside cytoplasm, with numerous small dots and larger tubule-like reticulate structures. Small fluorescent dots were detected also on the nuclear surface. These observations indicate that CTX-like compounds are present in G. australes cytoplasm, and then are, at least in part, released to cover the cell surface.

Acute Toxicity by Oral Co-Exposure to Palytoxin and Okadaic Acid in Mice.

The frequent occurrence of marine dinoflagellates producing palytoxin (PLTX) or okadaic acid (OA) raises concern for the possible co-presence of these toxins in seafood, leading to additive or synergistic adverse effects in consumers. Thus, the acute oral toxicity of PLTX and OA association was evaluated in mice: groups of eight female CD-1 mice were administered by gavage with combined doses of PLTX (30, 90 or 270 µg/kg) and OA (370 µg/kg), or with each individual toxin, recording signs up to 24 h (five mice) and 14 days (three mice). Lethal effects occurred only after PLTX (90 or 270 µg/kg) exposure, alone or combined with OA, also during the 14-day recovery. PLTX induced scratching, piloerection, abdominal swelling, muscle spasms, paralysis and dyspnea, which increased in frequency or duration when co-administered with OA. The latter induced only diarrhea. At 24 h, PLTX (90 or 270 µg/kg) and OA caused wall redness in the small intestine or pale fluid accumulation in its lumen, respectively. These effects co-occurred in mice co-exposed to PLTX (90 or 270 µg/kg) and OA, and were associated with slight ulcers and inflammation at forestomach. PLTX (270 µg/kg alone or 90 µg/kg associated with OA) also decreased the liver/body weight ratio, reducing hepatocyte glycogen (270 µg/kg, alone or combined with OA). No alterations were recorded in surviving mice after 14 days. Overall, the study suggests additive effects of PLTX and OA that should be considered for their risk assessment as seafood contaminants.

Hazard assessment of abraded thermoplastic composites reinforced with reduced graphene oxide.

Graphene-related materials (GRMs) are subject to intensive investigations and considerable progress has been made in recent years in terms of safety assessment. However, limited information is available concerning the hazard potential of GRM-containing products such as graphene-reinforced composites. In the present study, we conducted a comprehensive investigation of the potential biological effects of particles released through an abrasion process from reduced graphene oxide (rGO)-reinforced composites of polyamide 6 (PA6), a widely used engineered thermoplastic polymer, in comparison to as-produced rGO. First, a panel of well-established in vitro models, representative of the immune system and possible target organs such as the lungs, the gut, and the skin, was applied. Limited responses to PA6-rGO exposure were found in the different in vitro models. Only as-produced rGO induced substantial adverse effects, in particular in macrophages. Since inhalation of airborne materials is a key occupational concern, we then sought to test whether the in vitro responses noted for these materials would translate into adverse effects in vivo. To this end, the response at 1, 7 and 28 days after a single pulmonary exposure was evaluated in mice. In agreement with the in vitro data, PA6-rGO induced a modest and transient pulmonary inflammation, resolved by day 28. In contrast, rGO induced a longer-lasting, albeit moderate inflammation that did not lead to tissue remodeling within 28 days. Taken together, the present study suggests a negligible impact on human health under acute exposure conditions of GRM fillers such as rGO when released from composites at doses expected at the workplace.

Ecotoxicological Impact of the Marine Toxin Palytoxin on the Micro-Crustacean Artemia franciscana.

Palytoxin (PLTX) is a highly toxic polyether identified in various marine organisms, such as Palythoa soft corals, Ostreopsis dinoflagellates, and Trichodesmium cyanobacteria. In addition to adverse effects in humans, negative impacts on different marine organisms have been often described during Ostreopsis blooms and the concomitant presence of PLTX and its analogues. Considering the increasing frequency of Ostreopsis blooms due to global warming, PLTX was investigated for its effects on Artemia franciscana, a crustacean commonly used as a model organism for ecotoxicological studies. At concentrations comparable to those detected in culture media of O. cf. ovata (1.0-10.0 nM), PLTX significantly reduced cysts hatching and induced significant mortality of the organisms, both at larval and adult stages. Adults appeared to be the most sensitive developmental stage to PLTX: significant mortality was recorded after only 12 h of exposure to PLTX concentrations > 1.0 nM, with a 50% lethal concentration (LC50) of 2.3 nM (95% confidence interval = 1.2-4.7 nM). The toxic effects of PLTX toward A. franciscana adults seem to involve oxidative stress induction. Indeed, the toxin significantly increased ROS levels and altered the activity of the major antioxidant enzymes, in particular catalase and peroxidase, and marginally glutathione-S-transferase and superoxide dismutase. On the whole, these results indicate that environmentally relevant concentrations of PLTX could have a negative effect on Artemia franciscana population, suggesting its potential ecotoxicological impact at the marine level.

Evaluation of the shucking of certain species of scallops contaminated with domoic acid with a view to the production of edible parts meeting the safety requirements foreseen in the Union legislation.

EFSA was asked by the European Commission to provide information on the levels of domoic acid (DA) in whole scallops that would ensure that levels in edible parts are below the regulatory limit after shucking. This should include five species of scallops. In addition, EFSA was asked to recommend the number of scallops to be used in an analytical sample. To address these questions, EFSA received suitable data on DA for only one scallop species, Pecten maximus, i.e. data on pooled samples of edible and non-edible parts. A large part of the concentration levels was above the limit of quantification (LOQ) and only these data were used for the assessment. Shucking in most cases resulted in a strong decrease in the toxin levels. Statistical analysis of the data showed that levels in whole scallops should not exceed 24 mg DA/kg, 59 mg DA/kg and 127 mg DA/kg to ensure that levels in, respectively, gonads, muscle and muscle plus gonads are below the regulatory limit of 20 mg DA/kg with 99% certainty. Such an analysis was not possible for the other scallop species. In the absence of data from member states, published data of variations between scallops were used to calculate the sample size to ensure a 95% correct prediction on whether the level in scallops in an area or lot is correctly predicted to be compliant/non-compliant. It was shown that 10 scallops per sample would be sufficient to predict with 95% certainty if DA levels in the area/lot were twofold below or above the regulatory limit for the highest reported coefficient of variance (CV) of 1.06. To predict with 95% certainty for levels between 15 and 27 mg DA/kg, a pooled sample of more than 30 scallops would have to be tested.

Evaluation of the shucking of certain species of scallops contaminated with lipophilic toxins with a view to the production of edible parts meeting the safety requirements foreseen in the Union legislation.

EFSA was asked by the European Commission to provide information on levels of lipophilic shellfish toxins in whole scallops that would ensure levels in edible parts below the regulatory limits after shucking, i.e. removal of non-edible parts. This should include the okadaic acid (OA), the azaspiracid (AZA) and the yessotoxin (YTX) groups, and five species of scallops. In addition, EFSA was asked to recommend the number of scallops in an analytical sample. To address these questions, EFSA received suitable data on the three toxin groups in two scallop species, Aequipecten opercularis and Pecten maximus, i.e. data on individual and pooled samples of edible and non-edible parts from contamination incidents. The majority of the concentration levels were below limit of quantification (LOQ)/limit of detection (LOD), especially in adductor muscle but also in gonads. Shucking in most cases resulted in a strong decrease in the toxin levels. For Pecten maximus, statistical analysis showed that levels in whole scallops should not exceed 256 µg OA eq/kg or 217 µg AZA1 eq/kg to ensure that levels in gonads are below the regulatory limits of 160 µg OA or AZA1 eq/kg with 99% certainty. Such an analysis was not possible for yessotoxins or any toxin in Aequipecten opercularis and an assessment could only be based on upper bound levels. To ensure a 95% correct prediction on whether the level in scallops in an area or lot is correctly predicted to be compliant/non-compliant, it was shown that 10 scallops per sample would be sufficient to predict with 95% certainty if levels of OA-group toxins in the area/lot were 25% below or above the regulatory limit. However, to predict with a 95% certainty for levels between 140 and 180 µg OA eq/kg, a pooled sample of more than 30 scallops would have to be tested.

In Vitro Cell Sensitivity to Palytoxin Correlates with High Gene Expression of the Na+/K+-ATPase ß2 Subunit Isoform.

The marine polyether palytoxin (PLTX) is one of the most toxic natural compounds, and is involved in human poisonings after oral, inhalation, skin and/or ocular exposure. Epidemiological and molecular evidence suggest different inter-individual sensitivities to its toxic effects, possibly related to genetic-dependent differences in the expression of Na+/K+-ATPase, its molecular target. To identify Na+/K+-ATPase subunits, isoforms correlated with in vitro PLTX cytotoxic potency, sensitivity parameters (EC50: PLTX concentration reducing cell viability by 50%; Emax: maximum effect induced by the highest toxin concentration; 10-7 M) were assessed in 60 healthy donors' monocytes by the MTT (methylthiazolyl tetrazolium) assay. Sensitivity parameters, not correlated with donors' demographic variables (gender, age and blood group), demonstrated a high inter-individual variability (median EC50 = 2.7 × 10-10 M, interquartile range: 0.4-13.2 × 10-10 M; median Emax = 92.0%, interquartile range: 87.5-94.4%). Spearman's analysis showed significant positive correlations between the ß2-encoding ATP1B2 gene expression and Emax values (rho = 0.30; p = 0.025) and between Emax and the ATP1B2/ATP1B3 expression ratio (rho = 0.38; p = 0.004), as well as a significant negative correlation between Emax and the ATP1B1/ATP1B2 expression ratio (rho = -0.30; p = 0.026). This toxicogenetic study represents the first approach to define genetic risk factors that may influence the onset of adverse effects in human PLTX poisonings, suggesting that individuals with high gene expression pattern of the Na+/K+-ATPase ß2 subunit (alone or as ß2/ß1 and/or ß2/ß3 ratio) could be highly sensitive to PLTX toxic effects.

Partial Reversibility of the Cytotoxic Effect Induced by Graphene-Based Materials in Skin Keratinocytes.

In the frame of graphene-based material (GBM) hazard characterization, particular attention should be given to the cutaneous effects. Hence, this study investigates if HaCaT skin keratinocytes exposed to high concentrations of few-layer graphene (FLG) or partially dehydrated graphene oxide (d-GO) for a short time can recover from the cytotoxic insult, measured by means of cell viability, mitochondrial damage and oxidative stress, after GBM removal from the cell medium. When compared to 24 or 72 h continuous exposure, recovery experiments suggest that the cytotoxicity induced by 24 h exposure to GBM is only partially recovered after 48 h culture in GBM-free medium. This partial recovery, higher for FLG as compared to GO, is not mediated by autophagy and could be the consequence of GBM internalization into cells. The ability of GBMs to be internalized inside keratinocytes together with the partial reversibility of the cellular damage is important in assessing the risk associated with skin exposure to GBM-containing devices.

Acute Oral Toxicity of Pinnatoxin G in Mice.

Pinnatoxin G (PnTx-G) is a marine cyclic imine toxin produced by the dinoflagellate Vulcanodiniumrugosum, frequently detected in edible shellfish from Ingril Lagoon (France). As other pinnatoxins, to date, no human poisonings ascribed to consumption of PnTx-G contaminated seafood have been reported, despite its potent antagonism at nicotinic acetylcholine receptors and its high and fast-acting toxicity after intraperitoneal or oral administration in mice. The hazard characterization of PnTx-G by oral exposure is limited to a single acute toxicity study recording lethality and clinical signs in non-fasted mice treated by gavage or through voluntary food ingestion, which showed differences in PnTx-G toxic potency. Thus, an acute toxicity study was carried out using 3 h-fasted CD-1 female mice, administered by gavage with PnTx-G (8-450 µg kg-1). At the dose of 220 µg kg-1 and above, the toxin induced a rapid onset of clinical signs (piloerection, prostration, hypothermia, abdominal breathing, paralysis of the hind limbs, and cyanosis), leading to the death of mice within 30 min. Except for moderate mucosal degeneration in the small intestine recorded at doses of 300 µg kg-1, the toxin did not induce significant morphological changes in the other main organs and tissues, or alterations in blood chemistry parameters. This acute oral toxicity study allowed to calculate an oral LD50 for PnTx-G equal to 208 g kg-1 (95% confidence limits: 155-281 µg kg-1) and to estimate a provisional NOEL of 120 µg kg-1.

Skin irritation potential of graphene-based materials using a non-animal test.

Besides inhalation, skin contact may be considered one of the most relevant exposure routes to graphene-based materials (GBMs). However, very few data on the cutaneous toxicity of these materials are available, so far. This study is focused on skin irritation potential of a panel of GBMs: few-layer graphene (FLG), exfoliated by ball milling of graphite, FLG exfoliated by ultrasonication using sodium dodecyl sulfate (FLG-SDS) or sodium dodecylbenzenesulfonate (FLG-SDBS), CVD-graphene, obtained by chemical vapor deposition, graphene oxide (GO) and reduced GO (rGO). Skin irritation was assessed using the SkinEthic™ Reconstructed human Epidermis (RhE), following the Organisation for Economic Co-operation and Development (OECD) Test Guideline (TG) 439. Even though not validated for nanomaterials, the OCED TG 439 turned out to be applicable also for GBM testing, since no interference with the methylthiazolyldiphenyl-tetrazolium bromide (MTT) reduction, used as a final readout, was found. Furthermore, direct epidermal exposure to powdered GBMs mimics the actual human exposure, avoiding interference by the cell culture medium (protein corona formation). Only GBMs prepared with irritant surfactants (FLG-SDS and FLG-SDBS), but not the others, reduced RhE viability at levels lower than those predicting skin irritation (≤50%), suggesting irritant properties. This result was further confirmed by measuring cytokine (IL-1α, IL-6 and IL-8) release by GBM-treated RhE and by histological analysis as additional readouts to implement the guideline. On the whole, these results demonstrate that GBMs prepared with non-irritant exfoliation agents do not induce skin irritation after a single acute exposure.

Massive Occurrence of the Harmful Benthic Dinoflagellate Ostreopsis cf. ovata in the Eastern Adriatic Sea.

In September 2015, a massive occurrence of the Ostreopsis species was recorded in central Adriatic Kastela Bay. In order to taxonomically identify the Ostreopsis species responsible for this event and determine their toxin profile, cells collected in seawater and from benthic macroalgae were analyzed. Conservative taxonomic methods (light microscopy and SEM) and molecular methods (PCR-based assay) allowed the identification of the species Ostreopsis cf. ovata associated with Coolia monotis. The abundance of O. cf. ovata reached 2.9 × 104 cells L-1 in seawater, while on macroalgae, it was estimated to be up to 2.67 × 106 cells g-1 of macroalgae fresh weight and 14.4 × 106 cells g-1 of macroalgae dry weight. An indirect sandwich immunoenzymatic assay (ELISA) and liquid chromatography-high-resolution mass spectrometry (LC-HRMS) were used to determine the toxin profile. The ELISA assay revealed the presence of 5.6 pg palytoxin (PLTX) equivalents per O. cf. ovata cell. LC-HRMS was used for further characterization of the toxin profile, which showed that there were 6.3 pg of the sum of ovatoxins (OVTXs) and isobaric PLTX per O. cf. ovata cell, with a prevalence of OVTXs (6.2 pg cell-1), while the isobaric PLTX concentration was very low (0.1 pg cell-1). Among OVTXs, the highest concentration was recorded for OVTX-a (3.6 pg cell-1), followed by OVTX-b (1.3 pg cell-1), OVTX-d (1.1 pg cell-1), and OVTX-c (0.2 pg cell-1).

Azaspiracids Increase Mitochondrial Dehydrogenases Activity in Hepatocytes: Involvement of Potassium and Chloride Ions.

BACKGROUND: Azaspiracids (AZAs) are marine toxins that are produced by Azadinium and Amphidoma dinoflagellates that can contaminate edible shellfish inducing a foodborne poisoning in humans, which is characterized by gastrointestinal symptoms. Among these, AZA1, -2, and -3 are regulated in the European Union, being the most important in terms of occurrence and toxicity. In vivo studies in mice showed that, in addition to gastrointestinal effects, AZA1 induces liver alterations that are visible as a swollen organ, with the presence of hepatocellular fat droplets and vacuoles. Hence, an in vitro study was carried out to investigate the effects of AZA1, -2, and -3 on liver cells, using human non-tumor IHH hepatocytes. RESULTS: The exposure of IHH cells to AZA1, -2, or -3 (5 × 10-12-1 × 10-7 M) for 24 h did not affect the cell viability and proliferation (Sulforhodamine B assay and 3H-Thymidine incorporation assay), but they induced a significant concentration-dependent increase of mitochondrial dehydrogenases activity (MTT reduction assay). This effect depends on the activity of mitochondrial electron transport chain complex I and II, being counteracted by rotenone and tenoyl trifluoroacetone, respectively. Furthermore, AZAs-increased mitochondrial dehydrogenase activity was almost totally suppressed in the K+-, Cl--, and Na+-free media and sensitive to the specific inhibitors of KATP and hERG potassium channels, Na+/K+, ATPase, and cystic fibrosis transmembrane conductance regulator (CFTR) chloride channels. CONCLUSIONS: These results suggest that AZA mitochondrial effects in hepatocytes derive from an imbalance of intracellular levels of K+ and, in particular, Cl- ions, as demonstrated by the selective reduction of toxin effects by CFTR chloride channel inhibition.

A Novel Sensitive Cell-Based Immunoenzymatic Assay for Palytoxin Quantitation in Mussels.

The marine algal toxin palytoxin (PLTX) and its analogues are some of the most toxic marine compounds. Their accumulation in edible marine organisms and entrance into the food chain represent their main concerns for human health. Indeed, several fatal human poisonings attributed to these compounds have been recorded in tropical and subtropical areas. Due to the increasing occurrence of PLTX in temperate areas such as the Mediterranean Sea, the European Food Safety Authority (EFSA) has suggested a maximum limit of 30 µg PLTX/kg in shellfish meat, and has recommended the development of rapid, specific, and sensitive methods for detection and quantitation of PLTX in seafood. Thus, a novel, sensitive cell-based ELISA was developed and characterized for PLTX quantitation in mussels. The estimated limits of detection (LOD) and quantitation (LOQ) were 1.2 × 10-11 M (32.2 pg/mL) and 2.8 × 10-11 M (75.0 pg/mL), respectively, with good accuracy (bias = 2.5%) and repeatability (15% and 9% interday and intraday relative standard deviation of repeatability (RSDr), respectively). Minimal interference of 80% aqueous methanol extract allows PLTX quantitation in mussels at concentrations lower than the maximum limit suggested by EFSA, with an LOQ of 9.1 µg PLTX equivalent/kg mussel meat. Given its high sensitivity and specificity, the cell-based ELISA should be considered a suitable method for PLTX quantitation.